Free CAD Solid Models

Exact solid geometry (STEP and similar), ready to open in any CAD system, measure, section and modify. Every file here is public domain: open it in your browser, then download it and use it for anything.

11828 3D parts · STEP, STL, SketchUp, 3MF, OBJ, glTF, IFC, Rhino and more · public domain

Can’t find the part? Describe it and let AI build it → · AI Generator

Features:Real-world scale 771Assembly 474Low-poly 57✓ CAD solid 796

796 3D parts with CAD solid · Clear all

  • Ball bearing 608 (sealed)step608Rotate in 3D
    Ball bearing 608 (sealed)

    Ball bearing 608 (sealed), modeled from published dimensions. Overall 22 x 22 x 7 mm. Key dimensions: bore 8 mm; outside diameter 22 mm; width 7 mm; configuration Recessed dual seals; simplified internal envelope. Bore, outside diameter and width match the cited manufacturer dimensional table. Races and seal profiles are representative. Balls, cage, grease and internal clearances are omitted; this is an installation-envelope model. No load or speed rating is implied by this generic geometry. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  • Ball bearing 6005 (sealed)step6005Rotate in 3D
    Ball bearing 6005 (sealed)

    Ball bearing 6005 (sealed), modeled from published dimensions. Overall 47 x 47 x 12 mm. Key dimensions: bore 25 mm; outside diameter 47 mm; width 12 mm; configuration Recessed dual seals; simplified internal envelope. Bore, outside diameter and width match the cited manufacturer dimensional table. Races and seal profiles are representative. Balls, cage, grease and internal clearances are omitted; this is an installation-envelope model. No load or speed rating is implied by this generic geometry. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  • Ball bearing 6004 (sealed)step6004Rotate in 3D
    Ball bearing 6004 (sealed)

    Ball bearing 6004 (sealed), modeled from published dimensions. Overall 42 x 42 x 12 mm. Key dimensions: bore 20 mm; outside diameter 42 mm; width 12 mm; configuration Recessed dual seals; simplified internal envelope. Bore, outside diameter and width match the cited manufacturer dimensional table. Races and seal profiles are representative. Balls, cage, grease and internal clearances are omitted; this is an installation-envelope model. No load or speed rating is implied by this generic geometry. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  • Ball bearing 6003 (sealed)step6003Rotate in 3D
    Ball bearing 6003 (sealed)

    Ball bearing 6003 (sealed), modeled from published dimensions. Overall 35 x 35 x 10 mm. Key dimensions: bore 17 mm; outside diameter 35 mm; width 10 mm; configuration Recessed dual seals; simplified internal envelope. Bore, outside diameter and width match the cited manufacturer dimensional table. Races and seal profiles are representative. Balls, cage, grease and internal clearances are omitted; this is an installation-envelope model. No load or speed rating is implied by this generic geometry. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  • Ball bearing 6002 (sealed)step6002Rotate in 3D
    Ball bearing 6002 (sealed)

    Ball bearing 6002 (sealed), modeled from published dimensions. Overall 32 x 32 x 9 mm. Key dimensions: bore 15 mm; outside diameter 32 mm; width 9 mm; configuration Recessed dual seals; simplified internal envelope. Bore, outside diameter and width match the cited manufacturer dimensional table. Races and seal profiles are representative. Balls, cage, grease and internal clearances are omitted; this is an installation-envelope model. No load or speed rating is implied by this generic geometry. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  • Ball bearing 6001 (sealed)step6001Rotate in 3D
    Ball bearing 6001 (sealed)

    Ball bearing 6001 (sealed), modeled from published dimensions. Overall 28 x 28 x 8 mm. Key dimensions: bore 12 mm; outside diameter 28 mm; width 8 mm; configuration Recessed dual seals; simplified internal envelope. Bore, outside diameter and width match the cited manufacturer dimensional table. Races and seal profiles are representative. Balls, cage, grease and internal clearances are omitted; this is an installation-envelope model. No load or speed rating is implied by this generic geometry. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  • Ball bearing 6000 (sealed)step6000Rotate in 3D
    Ball bearing 6000 (sealed)

    Ball bearing 6000 (sealed), modeled from published dimensions. Overall 26 x 26 x 8 mm. Key dimensions: bore 10 mm; outside diameter 26 mm; width 8 mm; configuration Recessed dual seals; simplified internal envelope. Bore, outside diameter and width match the cited manufacturer dimensional table. Races and seal profiles are representative. Balls, cage, grease and internal clearances are omitted; this is an installation-envelope model. No load or speed rating is implied by this generic geometry. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  • NEMA 23 stepper motor 23HS22-2804SstepNEMA 23Rotate in 3D
    NEMA 23 stepper motor 23HS22-2804S

    NEMA 23 stepper motor 23HS22-2804S, modeled from published dimensions. Overall 57.3 x 59.3 x 77 mm. Key dimensions: drawing reference 23HS22-2804S; body width max 57.3 mm; body length max 56 mm; mount hole spacing XY 47.1 mm; mount hole diameter 5.2 mm; mount hole type 5.2 mm through clearance; shaft diameter 6.4 mm; shaft projection from mount face 21 mm; shaft flat dimension 5.9 mm; shaft flat length 15 mm; locating boss diameter 38.1 mm; locating boss height 1.6 mm. Mounting pattern, nominal shaft/flat/boss geometry and maximum body envelope follow the cited manufacturer drawing. Z=0 is the mounting face. Internal motor construction, long cable, markings and connector contacts are omitted. Case seams, fastener details and connector housing are representative. Mounting taps are shown as nominal cylindrical envelopes. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  • NEMA 17 stepper motor 17HS15-1504SstepNEMA 17Rotate in 3D
    NEMA 17 stepper motor 17HS15-1504S

    NEMA 17 stepper motor 17HS15-1504S, modeled from published dimensions. Overall 42.3 x 48.8 x 62.8 mm. Key dimensions: drawing reference 17HS15-1504S; body width max 42.3 mm; body length max 39.3 mm; mount hole spacing XY 31 mm; mount hole diameter 3 mm; mount hole type M3 nominal threaded envelope, depth 4.5; shaft diameter 5 mm; shaft projection from mount face 23.5 mm; shaft flat dimension 4.5 mm; shaft flat length 18 mm; locating boss diameter 22 mm; locating boss height 2 mm. Mounting pattern, nominal shaft/flat/boss geometry and maximum body envelope follow the cited manufacturer drawing. Z=0 is the mounting face. Internal motor construction, long cable, markings and connector contacts are omitted. Case seams, fastener details and connector housing are representative. Mounting taps are shown as nominal cylindrical envelopes. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  • Slotted spring pin 8 x 30 mmstepRotate in 3D
    Slotted spring pin 8 x 30 mm

    Slotted spring pin 8 x 30 mm, modeled from published dimensions. Overall 8.1 x 8.7 x 30 mm. Key dimensions: nominal installation diameter 8 mm; free outside diameter 8.7 mm; tip diameter 5.5 mm; length 30 mm; wall thickness 1.5 mm; lead length 1.8 mm; condition Free / uninstalled; slot opening degrees 60. Nominal installation diameter differs from the larger free-state pin diameter. OD, wall section and lead dimensions follow the cited ISO 8752 / DIN 1481 table. The slot angle and tapered wall transition are representative; elastic compression and interference forces are not simulated. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  • Slotted spring pin 6 x 24 mmstepRotate in 3D
    Slotted spring pin 6 x 24 mm

    Slotted spring pin 6 x 24 mm, modeled from published dimensions. Overall 6.1 x 6.6 x 24 mm. Key dimensions: nominal installation diameter 6 mm; free outside diameter 6.6 mm; tip diameter 4 mm; length 24 mm; wall thickness 1.2 mm; lead length 1.3 mm; condition Free / uninstalled; slot opening degrees 60. Nominal installation diameter differs from the larger free-state pin diameter. OD, wall section and lead dimensions follow the cited ISO 8752 / DIN 1481 table. The slot angle and tapered wall transition are representative; elastic compression and interference forces are not simulated. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  • Slotted spring pin 5 x 20 mmstepRotate in 3D
    Slotted spring pin 5 x 20 mm

    Slotted spring pin 5 x 20 mm, modeled from published dimensions. Overall 5.1 x 5.5 x 20 mm. Key dimensions: nominal installation diameter 5 mm; free outside diameter 5.5 mm; tip diameter 3.4 mm; length 20 mm; wall thickness 1 mm; lead length 1 mm; condition Free / uninstalled; slot opening degrees 60. Nominal installation diameter differs from the larger free-state pin diameter. OD, wall section and lead dimensions follow the cited ISO 8752 / DIN 1481 table. The slot angle and tapered wall transition are representative; elastic compression and interference forces are not simulated. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  • Slotted spring pin 4 x 16 mmstepRotate in 3D
    Slotted spring pin 4 x 16 mm

    Slotted spring pin 4 x 16 mm, modeled from published dimensions. Overall 4.2 x 4.5 x 16 mm. Key dimensions: nominal installation diameter 4 mm; free outside diameter 4.5 mm; tip diameter 2.8 mm; length 16 mm; wall thickness 0.8 mm; lead length 0.8 mm; condition Free / uninstalled; slot opening degrees 60. Nominal installation diameter differs from the larger free-state pin diameter. OD, wall section and lead dimensions follow the cited ISO 8752 / DIN 1481 table. The slot angle and tapered wall transition are representative; elastic compression and interference forces are not simulated. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  • Slotted spring pin 3 x 12 mmstepRotate in 3D
    Slotted spring pin 3 x 12 mm

    Slotted spring pin 3 x 12 mm, modeled from published dimensions. Overall 3.2 x 3.4 x 12 mm. Key dimensions: nominal installation diameter 3 mm; free outside diameter 3.4 mm; tip diameter 2.1 mm; length 12 mm; wall thickness 0.6 mm; lead length 0.6 mm; condition Free / uninstalled; slot opening degrees 60. Nominal installation diameter differs from the larger free-state pin diameter. OD, wall section and lead dimensions follow the cited ISO 8752 / DIN 1481 table. The slot angle and tapered wall transition are representative; elastic compression and interference forces are not simulated. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  • Dowel pin 8 x 30 mmstepRotate in 3D
    Dowel pin 8 x 30 mm

    Dowel pin 8 x 30 mm, modeled from published dimensions. Overall 8 x 8 x 30 mm. Key dimensions: nominal diameter 8 mm; length 30 mm; modeled fit Basic nominal diameter; m6 allowance not applied; end chamfer 0.8 mm. Basic nominal diameter and selected length are exact in the CAD. The source describes m6-fit production pins; this model deliberately uses the nominal reference diameter, without an interference-fit allowance. End treatment is a simplified chamfer within the cited maximum end length. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  • Dowel pin 6 x 24 mmstepRotate in 3D
    Dowel pin 6 x 24 mm

    Dowel pin 6 x 24 mm, modeled from published dimensions. Overall 6 x 6 x 24 mm. Key dimensions: nominal diameter 6 mm; length 24 mm; modeled fit Basic nominal diameter; m6 allowance not applied; end chamfer 0.6 mm. Basic nominal diameter and selected length are exact in the CAD. The source describes m6-fit production pins; this model deliberately uses the nominal reference diameter, without an interference-fit allowance. End treatment is a simplified chamfer within the cited maximum end length. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  • Dowel pin 5 x 20 mmstepRotate in 3D
    Dowel pin 5 x 20 mm

    Dowel pin 5 x 20 mm, modeled from published dimensions. Overall 5 x 5 x 20 mm. Key dimensions: nominal diameter 5 mm; length 20 mm; modeled fit Basic nominal diameter; m6 allowance not applied; end chamfer 0.5 mm. Basic nominal diameter and selected length are exact in the CAD. The source describes m6-fit production pins; this model deliberately uses the nominal reference diameter, without an interference-fit allowance. End treatment is a simplified chamfer within the cited maximum end length. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  • Dowel pin 4 x 16 mmstepRotate in 3D
    Dowel pin 4 x 16 mm

    Dowel pin 4 x 16 mm, modeled from published dimensions. Overall 4 x 4 x 16 mm. Key dimensions: nominal diameter 4 mm; length 16 mm; modeled fit Basic nominal diameter; m6 allowance not applied; end chamfer 0.4 mm. Basic nominal diameter and selected length are exact in the CAD. The source describes m6-fit production pins; this model deliberately uses the nominal reference diameter, without an interference-fit allowance. End treatment is a simplified chamfer within the cited maximum end length. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  • Dowel pin 3 x 12 mmstepRotate in 3D
    Dowel pin 3 x 12 mm

    Dowel pin 3 x 12 mm, modeled from published dimensions. Overall 3 x 3 x 12 mm. Key dimensions: nominal diameter 3 mm; length 12 mm; modeled fit Basic nominal diameter; m6 allowance not applied; end chamfer 0.3 mm. Basic nominal diameter and selected length are exact in the CAD. The source describes m6-fit production pins; this model deliberately uses the nominal reference diameter, without an interference-fit allowance. End treatment is a simplified chamfer within the cited maximum end length. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  • DIN 472 internal circlip 20 mmstepRotate in 3D
    DIN 472 internal circlip 20 mm

    DIN 472 internal circlip 20 mm, modeled from published dimensions. Overall 21.5 x 21.5 x 1 mm. Key dimensions: nominal bore 20 mm; free diameter 21.5 mm; thickness 1 mm; crown radial width 2.3 mm; pliers hole diameter 2 mm; mating groove diameter 21 mm; mating groove width 1.1 mm; condition Free / uninstalled. Free-state diameter, thickness, crown width and pliers holes follow the cited table. The ring must deform for installation; the separate groove dimensions describe its mating feature. Ring outline, end-gap width and lug shape are representative; the source explicitly permits manufacturer-dependent outlines. No elastic or load-capacity simulation is assigned. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  • DIN 472 internal circlip 16 mmstepRotate in 3D
    DIN 472 internal circlip 16 mm

    DIN 472 internal circlip 16 mm, modeled from published dimensions. Overall 17.3 x 17.3 x 1 mm. Key dimensions: nominal bore 16 mm; free diameter 17.3 mm; thickness 1 mm; crown radial width 2 mm; pliers hole diameter 1.7 mm; mating groove diameter 16.8 mm; mating groove width 1.1 mm; condition Free / uninstalled. Free-state diameter, thickness, crown width and pliers holes follow the cited table. The ring must deform for installation; the separate groove dimensions describe its mating feature. Ring outline, end-gap width and lug shape are representative; the source explicitly permits manufacturer-dependent outlines. No elastic or load-capacity simulation is assigned. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  • DIN 472 internal circlip 12 mmstepRotate in 3D
    DIN 472 internal circlip 12 mm

    DIN 472 internal circlip 12 mm, modeled from published dimensions. Overall 13 x 13 x 1 mm. Key dimensions: nominal bore 12 mm; free diameter 13 mm; thickness 1 mm; crown radial width 1.7 mm; pliers hole diameter 1.5 mm; mating groove diameter 12.5 mm; mating groove width 1.1 mm; condition Free / uninstalled. Free-state diameter, thickness, crown width and pliers holes follow the cited table. The ring must deform for installation; the separate groove dimensions describe its mating feature. Ring outline, end-gap width and lug shape are representative; the source explicitly permits manufacturer-dependent outlines. No elastic or load-capacity simulation is assigned. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  • DIN 472 internal circlip 10 mmstepRotate in 3D
    DIN 472 internal circlip 10 mm

    DIN 472 internal circlip 10 mm, modeled from published dimensions. Overall 10.8 x 10.8 x 1 mm. Key dimensions: nominal bore 10 mm; free diameter 10.8 mm; thickness 1 mm; crown radial width 1.4 mm; pliers hole diameter 1.2 mm; mating groove diameter 10.4 mm; mating groove width 1.1 mm; condition Free / uninstalled. Free-state diameter, thickness, crown width and pliers holes follow the cited table. The ring must deform for installation; the separate groove dimensions describe its mating feature. Ring outline, end-gap width and lug shape are representative; the source explicitly permits manufacturer-dependent outlines. No elastic or load-capacity simulation is assigned. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  • DIN 471 external circlip 20 mmstepRotate in 3D
    DIN 471 external circlip 20 mm

    DIN 471 external circlip 20 mm, modeled from published dimensions. Overall 25 x 25.1 x 1.2 mm. Key dimensions: nominal shaft 20 mm; free diameter 18.5 mm; thickness 1.2 mm; crown radial width 2.6 mm; pliers hole diameter 2 mm; mating groove diameter 19 mm; mating groove width 1.3 mm; condition Free / uninstalled. Free-state diameter, thickness, crown width and pliers holes follow the cited table. The ring must deform for installation; the separate groove dimensions describe its mating feature. Ring outline, end-gap width and lug shape are representative; the source explicitly permits manufacturer-dependent outlines. No elastic or load-capacity simulation is assigned. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

Looking for 2D drawings, blocks and details? Browse the Drawing Library (1863).

Request a Part

If the library doesn’t have what you need, tell us. Requests decide what we add next. Leave an email and we’ll send you one message when it’s added.

Share Your Parts

Designed a part others could use? Upload STEP, STL, SketchUp or other 3D files, or a zip of them, and describe each one. Everything is reviewed before it appears, released under CC0, and kept for 1 to 5 years depending on file size. You can also add a single file from the viewer’s Share dialog. See the library terms.

Contribute parts

Parts here are contributed by their authors or come from public-domain collections. If you believe a file infringes your rights, use Report on its viewer page or see our copyright policy.