DIN 472 internal circlip 10 mm
3D model · STEP · 37 KB
Need another format? Open it in the viewer and use Export.
Source: Innerscene - original model
Description
DIN 472 internal circlip 10 mm, modeled from published dimensions. Overall 10.8 x 10.8 x 1 mm. Key dimensions: nominal bore 10 mm; free diameter 10.8 mm; thickness 1 mm; crown radial width 1.4 mm; pliers hole diameter 1.2 mm; mating groove diameter 10.4 mm; mating groove width 1.1 mm; condition Free / uninstalled. Free-state diameter, thickness, crown width and pliers holes follow the cited table. The ring must deform for installation; the separate groove dimensions describe its mating feature. Ring outline, end-gap width and lug shape are representative; the source explicitly permits manufacturer-dependent outlines. No elastic or load-capacity simulation is assigned. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.
File: circlip-internal-10.step · added 2026-10-05 · available until 2031-10-05. Added from Innerscene - original model under its CC0 dedication; see the library terms. Think this part infringes someone’s rights? Use Report on the viewer page or see our copyright policy.