UCP204 pillow-block bearing
3D model · STEP · 376 KB
Need another format? Open it in the viewer and use Export.
Source: Innerscene - original model
Description
UCP204 pillow-block bearing, modeled from published dimensions. Overall 127 x 38 x 70.4 mm. Key dimensions: bore 20 mm; shaft axis height 33.3 mm; length 127 mm; base width 38 mm; bolt pitch 95 mm; foot height 16 mm; housing height 65 mm; insert outer diameter 47 mm; insert width 31 mm; insert short offset 12.7 mm; grease fitting 1/4-28 UNF nominal, thread omitted. Shaft height, bore, mounting slots, base envelope and insert datums follow the Koyo tables. Housing H2 excludes the grease fitting; its reconstructed fitting adds 5.35 mm. Cast contour, ribs, relief, seal/race details and screw heads are reconstructed. Spherical outer ring is shown upright in a simplified cylindrical seat; self-alignment, rolling elements, preload and load rating are not simulated. M6 set screws have cylindrical thread envelopes. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.
File: ucp204.step · added 2026-10-05 · available until 2031-10-05. Added from Innerscene - original model under its CC0 dedication; see the library terms. Think this part infringes someone’s rights? Use Report on the viewer page or see our copyright policy.