UCP205 pillow-block bearing
3D model · STEP · 371 KB
Need another format? Open it in the viewer and use Export.
Source: Innerscene - original model
Description
UCP205 pillow-block bearing, modeled from published dimensions. Overall 140 x 38.8 x 75.4 mm. Key dimensions: bore 25 mm; shaft axis height 36.5 mm; length 140 mm; base width 38 mm; bolt pitch 105 mm; foot height 16 mm; housing height 70 mm; insert outer diameter 52 mm; insert width 34.1 mm; insert short offset 14.3 mm; grease fitting 1/4-28 UNF nominal, thread omitted. Shaft height, bore, mounting slots, base envelope and insert datums follow the Koyo tables. Housing H2 excludes the grease fitting; its reconstructed fitting adds 5.35 mm. Cast contour, ribs, relief, seal/race details and screw heads are reconstructed. Spherical outer ring is shown upright in a simplified cylindrical seat; self-alignment, rolling elements, preload and load rating are not simulated. M6 set screws have cylindrical thread envelopes. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.
File: ucp205.step · added 2026-10-05 · available until 2031-10-05. Added from Innerscene - original model under its CC0 dedication; see the library terms. Think this part infringes someone’s rights? Use Report on the viewer page or see our copyright policy.