Dowel pin 5 x 20 mm
3D model · STEP · 13 KB
Need another format? Open it in the viewer and use Export.
Source: Innerscene - original model
Description
Dowel pin 5 x 20 mm, modeled from published dimensions. Overall 5 x 5 x 20 mm. Key dimensions: nominal diameter 5 mm; length 20 mm; modeled fit Basic nominal diameter; m6 allowance not applied; end chamfer 0.5 mm. Basic nominal diameter and selected length are exact in the CAD. The source describes m6-fit production pins; this model deliberately uses the nominal reference diameter, without an interference-fit allowance. End treatment is a simplified chamfer within the cited maximum end length. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.
File: dowel-5x20.step · added 2026-10-05 · available until 2031-10-05. Added from Innerscene - original model under its CC0 dedication; see the library terms. Think this part infringes someone’s rights? Use Report on the viewer page or see our copyright policy.