Slotted spring pin 5 x 20 mm
3D model · STEP · 36 KB
Need another format? Open it in the viewer and use Export.
Source: Innerscene - original model
Description
Slotted spring pin 5 x 20 mm, modeled from published dimensions. Overall 5.1 x 5.5 x 20 mm. Key dimensions: nominal installation diameter 5 mm; free outside diameter 5.5 mm; tip diameter 3.4 mm; length 20 mm; wall thickness 1 mm; lead length 1 mm; condition Free / uninstalled; slot opening degrees 60. Nominal installation diameter differs from the larger free-state pin diameter. OD, wall section and lead dimensions follow the cited ISO 8752 / DIN 1481 table. The slot angle and tapered wall transition are representative; elastic compression and interference forces are not simulated. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.
File: roll-pin-5x20.step · added 2026-10-05 · available until 2031-10-05. Added from Innerscene - original model under its CC0 dedication; see the library terms. Think this part infringes someone’s rights? Use Report on the viewer page or see our copyright policy.