Free STEP Models

715 3D parts as STEP · Clear all

• stepUCP204Rotate in 3D
  UCP204 pillow-block bearing

  UCP204 pillow-block bearing, modeled from published dimensions. Overall 127 x 38 x 70.4 mm. Key dimensions: bore 20 mm; shaft axis height 33.3 mm; length 127 mm; base width 38 mm; bolt pitch 95 mm; foot height 16 mm; housing height 65 mm; insert outer diameter 47 mm; insert width 31 mm; insert short offset 12.7 mm; grease fitting 1/4-28 UNF nominal, thread omitted. Shaft height, bore, mounting slots, base envelope and insert datums follow the Koyo tables. Housing H2 excludes the grease fitting; its reconstructed fitting adds 5.35 mm. Cast contour, ribs, relief, seal/race details and screw heads are reconstructed. Spherical outer ring is shown upright in a simplified cylindrical seat; self-alignment, rolling elements, preload and load rating are not simulated. M6 set screws have cylindrical thread envelopes. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  376 KBDetails & download
• stepUCF205Rotate in 3D
  UCF205 square-flange bearing

  UCF205 square-flange bearing, modeled from published dimensions. Overall 95 x 95 x 35.8 mm. Key dimensions: bore 25 mm; flange square 95 mm; bolt square 70 mm; bolt hole diameter 12 mm; flange thickness 13 mm; housing projection 27 mm; insert center from mount face 16 mm; total projection 35.8 mm; insert outer diameter 52 mm; insert width 34.1 mm; insert short offset 14.3 mm; grease fitting 1/4-28 UNF nominal, thread omitted. Mounting square, hole diameter, flange thickness, insert center and total projection follow the Koyo UCF table. The mount face is Z=0, and the shaft axis is +Z. Cast outline and boss, grease fitting, seals and race details are reconstructed. Spherical insert occupies a simplified cylindrical seat. Rolling elements, self-alignment, preload and load rating are not simulated. M6 set screws have cylindrical thread envelopes. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  304 KBDetails & download
• stepUCF204Rotate in 3D
  UCF204 square-flange bearing

  UCF204 square-flange bearing, modeled from published dimensions. Overall 86 x 86 x 33.3 mm. Key dimensions: bore 20 mm; flange square 86 mm; bolt square 64 mm; bolt hole diameter 12 mm; flange thickness 11 mm; housing projection 25.5 mm; insert center from mount face 15 mm; total projection 33.3 mm; insert outer diameter 47 mm; insert width 31 mm; insert short offset 12.7 mm; grease fitting 1/4-28 UNF nominal, thread omitted. Mounting square, hole diameter, flange thickness, insert center and total projection follow the Koyo UCF table. The mount face is Z=0, and the shaft axis is +Z. Cast outline and boss, grease fitting, seals and race details are reconstructed. Spherical insert occupies a simplified cylindrical seat. Rolling elements, self-alignment, preload and load rating are not simulated. M6 set screws have cylindrical thread envelopes. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  301 KBDetails & download
• stepSC8UURotate in 3D
  SC8UU housed linear bearing

  SC8UU housed linear bearing, modeled from published dimensions. Overall 34 x 30 x 22 mm. Key dimensions: shaft bore 8 mm; width 34 mm; length 30 mm; height 22 mm; shaft axis height 11 mm; mount tap M4; mount tap depth 8 mm; through pilot 3.4 mm. Housing envelope, shaft center and four mounting datums follow the SBC SC table. Mounting taps are nominal cylindrical envelopes with the specified pilot continuing through. Housing relief contours and retainers are reconstructed. The bearing uses representative ball/retainer details and is shown unloaded; no stiffness or load rating is assigned. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  1.2 MBDetails & download
• stepSC10UURotate in 3D
  SC10UU housed linear bearing

  SC10UU housed linear bearing, modeled from published dimensions. Overall 40 x 35 x 26 mm. Key dimensions: shaft bore 10 mm; width 40 mm; length 35 mm; height 26 mm; shaft axis height 13 mm; mount tap M5; mount tap depth 12 mm; through pilot 4.3 mm. Housing envelope, shaft center and four mounting datums follow the SBC SC table. Mounting taps are nominal cylindrical envelopes with the specified pilot continuing through. Housing relief contours and retainers are reconstructed. The bearing uses representative ball/retainer details and is shown unloaded; no stiffness or load rating is assigned. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  1023 KBDetails & download
• stepLM8UURotate in 3D
  LM8UU linear ball bushing

  LM8UU linear ball bushing, modeled from published dimensions. Overall 15 x 15 x 24 mm. Key dimensions: shaft bore 8 mm; outside diameter 15 mm; length 24 mm; groove inner edge spacing 17.5 mm; groove root diameter 14.3 mm; groove width 1.1 mm; ball rows 4. Nominal bore, outer envelope and retaining grooves follow the maker table. Modeled at nominal dimensions without tolerance offsets. Ball diameter/count, retainer and seal details are representative; recirculating return tracks, preload, friction and load ratings are not modeled. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  1.1 MBDetails & download
• stepLM10UURotate in 3D
  LM10UU linear ball bushing

  LM10UU linear ball bushing, modeled from published dimensions. Overall 19 x 19 x 29 mm. Key dimensions: shaft bore 10 mm; outside diameter 19 mm; length 29 mm; groove inner edge spacing 22 mm; groove root diameter 18 mm; groove width 1.3 mm; ball rows 4. Nominal bore, outer envelope and retaining grooves follow the maker table. Modeled at nominal dimensions without tolerance offsets. Ball diameter/count, retainer and seal details are representative; recirculating return tracks, preload, friction and load ratings are not modeled. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  894 KBDetails & download
• stepRotate in 3D
  TT-style DG01D dual-output gear motor

  TT-style DG01D dual-output gear motor, modeled from published dimensions. Overall 37.6 x 64.2 x 22.5 mm. Key dimensions: body length 64.2 mm; gearbox thickness 18.8 mm; gearbox height 22.5 mm; shaft span 37.6 mm; output axis from nose 11.2 mm; shaft major diameter 5.4 mm; shaft across flats 3.6 mm; shaft bore 1.9 mm; mount hole diameter 3 mm; mount hole pitch 17.5 mm; mount hole from nose 31.8 mm; motor retainer width 22.5 mm. Installation datums follow the DAGU DG01D-A130 manufacturer drawing hosted by SparkFun. This specific TT-style design is not dimensionally interchangeable with every yellow TT gear motor. Undimensioned shell contour, seam, internal motor seat and metal retaining band are reconstructed. Auxiliary nose lug and electrical terminals are omitted; the 64.2 mm length refers to the dimensioned body datum. Internal gears and performance are not modeled. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  295 KBDetails & download
• stepRotate in 3D
  N20 9 mm gearbox with rear shaft

  N20 9 mm gearbox with rear shaft, modeled from published dimensions. Overall 12 x 10 x 40.2 mm. Key dimensions: gearbox width 12 mm; gearbox height 10 mm; gearbox length 9 mm; motor can length 15 mm; front face to terminal end 25.6 mm; output shaft diameter 3 mm; output D dimension 2.5 mm; output projection 10 mm; output boss diameter 4 mm; output boss projection 0.7 mm; mount pitch 9 mm; mount thread M1.6; rear shaft diameter 1 mm; rear shaft projection 5 mm. Nominal dimensions follow Pololu precious-metal-brush mechanical drawings (datasheet page 8). The long 12.5 mm gearbox envelope corresponds to the 1000:1 option. The shaft flat spans Z=1 to 10 mm; front mounting holes are nominal M1.6 envelopes. Visible spur gear stacks, tooth counts and axles are representative, not a working reduction train. Case seams, post positions and brush/terminal details are reconstructed. No ratio, torque, speed, tolerance or encoder functionality is simulated. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  1.8 MBDetails & download
• stepRotate in 3D
  N20 9 mm gearbox

  N20 9 mm gearbox, modeled from published dimensions. Overall 12 x 10 x 35.6 mm. Key dimensions: gearbox width 12 mm; gearbox height 10 mm; gearbox length 9 mm; motor can length 15 mm; front face to terminal end 25.6 mm; output shaft diameter 3 mm; output D dimension 2.5 mm; output projection 10 mm; output boss diameter 4 mm; output boss projection 0.7 mm; mount pitch 9 mm; mount thread M1.6; rear shaft diameter 0 mm; rear shaft projection 0 mm. Nominal dimensions follow Pololu precious-metal-brush mechanical drawings (datasheet page 8). The long 12.5 mm gearbox envelope corresponds to the 1000:1 option. The shaft flat spans Z=1 to 10 mm; front mounting holes are nominal M1.6 envelopes. Visible spur gear stacks, tooth counts and axles are representative, not a working reduction train. Case seams, post positions and brush/terminal details are reconstructed. No ratio, torque, speed, tolerance or encoder functionality is simulated. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  1.8 MBDetails & download
• stepRotate in 3D
  N20 12.5 mm gearbox with rear shaft

  N20 12.5 mm gearbox with rear shaft, modeled from published dimensions. Overall 12 x 10 x 43.7 mm. Key dimensions: gearbox width 12 mm; gearbox height 10 mm; gearbox length 12.5 mm; motor can length 15 mm; front face to terminal end 29.1 mm; output shaft diameter 3 mm; output D dimension 2.5 mm; output projection 10 mm; output boss diameter 4 mm; output boss projection 0.7 mm; mount pitch 9 mm; mount thread M1.6; rear shaft diameter 1 mm; rear shaft projection 5 mm. Nominal dimensions follow Pololu precious-metal-brush mechanical drawings (datasheet page 8). The long 12.5 mm gearbox envelope corresponds to the 1000:1 option. The shaft flat spans Z=1 to 10 mm; front mounting holes are nominal M1.6 envelopes. Visible spur gear stacks, tooth counts and axles are representative, not a working reduction train. Case seams, post positions and brush/terminal details are reconstructed. No ratio, torque, speed, tolerance or encoder functionality is simulated. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  1.8 MBDetails & download
• stepRotate in 3D
  HS-311 standard servo with original horn

  HS-311 standard servo with original horn, modeled from published dimensions. Overall 58.5 x 20 x 42.8 mm. Key dimensions: case length 40 mm; case width 20 mm; case height 36.5 mm; tab span 53 mm; tab width 20 mm; tab under height 26.5 mm; tab thickness 2.5 mm; mount slot diameter 4.5 mm; output axis x 10 mm; output teeth 24; output major diameter 6 mm; output tip height 41.6 mm; horn true. Body, tab height and mounting pitch follow the manufacturer drawing. Case contours and spline tooth form are reconstructed. Flexible leads, electrical internals and motion are omitted. Taps are nominal cylindrical envelopes. Original single-arm horn has 1.7 mm linkage holes at 3 mm pitch; it is not a vendor horn drawing. HS-311 uses the 2025 MULTIPLEX/Hitec drawing: 53 mm tab span, 47.8 x 10.2 mm slot pattern and 41.6 mm height to the output tip. The nominal 24-tooth output is 6 mm diameter; tooth profile is illustrative. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  805 KBDetails & download
• stepRotate in 3D
  HS-311 standard servo

  HS-311 standard servo, modeled from published dimensions. Overall 53 x 20 x 41.6 mm. Key dimensions: case length 40 mm; case width 20 mm; case height 36.5 mm; tab span 53 mm; tab width 20 mm; tab under height 26.5 mm; tab thickness 2.5 mm; mount slot diameter 4.5 mm; output axis x 10 mm; output teeth 24; output major diameter 6 mm; output tip height 41.6 mm; horn false. Body, tab height and mounting pitch follow the manufacturer drawing. Case contours and spline tooth form are reconstructed. Flexible leads, electrical internals and motion are omitted. Taps are nominal cylindrical envelopes. Bare output shaft; no horn fitted. HS-311 uses the 2025 MULTIPLEX/Hitec drawing: 53 mm tab span, 47.8 x 10.2 mm slot pattern and 41.6 mm height to the output tip. The nominal 24-tooth output is 6 mm diameter; tooth profile is illustrative. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  716 KBDetails & download
• stepRotate in 3D
  FS90-C 9 g micro servo with original horn

  FS90-C 9 g micro servo with original horn, modeled from published dimensions. Overall 36.7 x 12.5 x 31.4 mm. Key dimensions: case length 23.2 mm; case width 12.5 mm; case height 23 mm; tab span 32.6 mm; tab width 11.8 mm; tab under height 16.4 mm; tab thickness 2.4 mm; mount slot diameter 4 mm; output axis x 5.4 mm; output teeth 20; output major diameter 4.8 mm; output tip height 30.5 mm; horn true. Body, tab height and mounting pitch follow the manufacturer drawing. Case contours and spline tooth form are reconstructed. Flexible leads, electrical internals and motion are omitted. Taps are nominal cylindrical envelopes. Original single-arm horn has 1.7 mm linkage holes at 3 mm pitch; it is not a vendor horn drawing. FS90 output center X=5.35 mm is inferred from the case geometry; tab slot diameter 4 mm and spline extension 3.2 mm are selected from the undimensioned drawing. Verify those interfaces against the physical servo before drilling or making a mating spline. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  717 KBDetails & download
• stepRotate in 3D
  FS90-C 9 g micro servo

  FS90-C 9 g micro servo, modeled from published dimensions. Overall 32.6 x 12.5 x 30.5 mm. Key dimensions: case length 23.2 mm; case width 12.5 mm; case height 23 mm; tab span 32.6 mm; tab width 11.8 mm; tab under height 16.4 mm; tab thickness 2.4 mm; mount slot diameter 4 mm; output axis x 5.4 mm; output teeth 20; output major diameter 4.8 mm; output tip height 30.5 mm; horn false. Body, tab height and mounting pitch follow the manufacturer drawing. Case contours and spline tooth form are reconstructed. Flexible leads, electrical internals and motion are omitted. Taps are nominal cylindrical envelopes. Bare output shaft; no horn fitted. FS90 output center X=5.35 mm is inferred from the case geometry; tab slot diameter 4 mm and spline extension 3.2 mm are selected from the undimensioned drawing. Verify those interfaces against the physical servo before drilling or making a mating spline. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  638 KBDetails & download
• stepM8Rotate in 3D
  M8 channel nut, original 34 x 19 mm layout

  M8 channel nut, original 34 x 19 mm layout, modeled from published dimensions. Overall 34 x 19 x 8 mm. Key dimensions: thread diameter 8 mm; pitch 1.3 mm; length 34 mm; width 19 mm; height 8 mm; groove width 2.7 mm; groove depth 1.2 mm. Modeled right-hand nominal 60-degree threads. Tolerance allowances, root radii and manufacturing runouts are simplified; use the stated nominal dimensions for layout. Original nut sized to the reconstructed channel cavity and return lips. The source establishes the channel-nut type and thread options only; the external dimensions and grooves are this library design, not a vendor replica. Unloaded plain nut without a positioning spring. Serrations, spring action and load capacity are not modeled. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  444 KBDetails & download
• stepM12Rotate in 3D
  M12 channel nut, original 34 x 19 mm layout

  M12 channel nut, original 34 x 19 mm layout, modeled from published dimensions. Overall 34 x 19 x 8 mm. Key dimensions: thread diameter 12 mm; pitch 1.8 mm; length 34 mm; width 19 mm; height 8 mm; groove width 2.7 mm; groove depth 1.2 mm. Modeled right-hand nominal 60-degree threads. Tolerance allowances, root radii and manufacturing runouts are simplified; use the stated nominal dimensions for layout. Original nut sized to the reconstructed channel cavity and return lips. The source establishes the channel-nut type and thread options only; the external dimensions and grooves are this library design, not a vendor replica. Unloaded plain nut without a positioning spring. Serrations, spring action and load capacity are not modeled. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  406 KBDetails & download
• step50 x 47Rotate in 3D
  40 mm strut angle, 50 x 47 mm legs

  40 mm strut angle, 50 x 47 mm legs, modeled from published dimensions. Overall 40 x 50 x 47 mm. Key dimensions: width 40 mm; thickness 5 mm; hole diameter 14 mm; selected hole offset from free end 20.5 mm. P1026 metric width, leg envelopes, thickness and 14 mm holes follow the manufacturer sheet. Hole centers are selected at 20.5 mm from each free end because the sheet does not dimension them; corner bend radii are simplified. This original drilling layout is not a verified vendor drilling template. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  56 KBDetails & download
• step41 x 41Rotate in 3D
  41 x 41 x 2.5 mm slotted strut, 600 mm

  41 x 41 x 2.5 mm slotted strut, 600 mm, modeled from published dimensions. Overall 41 x 41 x 600 mm. Key dimensions: width 41 mm; height 41 mm; thickness 2.5 mm; length 600 mm; slot pitch 50 mm; first slot center 25 mm; reconstructed mouth 22 mm; reconstructed lip drop 7.5 mm. Metric P1000/P1000T installation envelope and slotted-hole size/pitch. Selected cut length and first-hole offset are library choices. This is the 41 mm metric section, not the 41.3 mm US section. Return lip, 22 mm mouth, 7.5 mm return depth and 0.7 mm corner radii are original reconstructed details not dimensioned by the cited metric sheet. Section properties and structural capacity are not assigned. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  319 KBDetails & download
• step41 x 41Rotate in 3D
  41 x 41 x 2.5 mm slotted strut, 300 mm

  41 x 41 x 2.5 mm slotted strut, 300 mm, modeled from published dimensions. Overall 41 x 41 x 300 mm. Key dimensions: width 41 mm; height 41 mm; thickness 2.5 mm; length 300 mm; slot pitch 50 mm; first slot center 25 mm; reconstructed mouth 22 mm; reconstructed lip drop 7.5 mm. Metric P1000/P1000T installation envelope and slotted-hole size/pitch. Selected cut length and first-hole offset are library choices. This is the 41 mm metric section, not the 41.3 mm US section. Return lip, 22 mm mouth, 7.5 mm return depth and 0.7 mm corner radii are original reconstructed details not dimensioned by the cited metric sheet. Section properties and structural capacity are not assigned. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  221 KBDetails & download
• step41 x 41Rotate in 3D
  41 x 41 x 2.5 mm plain strut, 300 mm

  41 x 41 x 2.5 mm plain strut, 300 mm, modeled from published dimensions. Overall 41 x 41 x 300 mm. Key dimensions: width 41 mm; height 41 mm; thickness 2.5 mm; length 300 mm; reconstructed mouth 22 mm; reconstructed lip drop 7.5 mm. Metric P1000/P1000T installation envelope and slotted-hole size/pitch. Selected cut length and first-hole offset are library choices. This is the 41 mm metric section, not the 41.3 mm US section. Return lip, 22 mm mouth, 7.5 mm return depth and 0.7 mm corner radii are original reconstructed details not dimensioned by the cited metric sheet. Section properties and structural capacity are not assigned. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  124 KBDetails & download
• stepM8Rotate in 3D
  M8 x 100 mm threaded rod

  M8 x 100 mm threaded rod, modeled from published dimensions. Overall 8 x 8 x 100 mm. Key dimensions: thread diameter 8 mm; pitch 1.3 mm; length 100 mm; root land radial adjustment 0 mm. Modeled right-hand nominal 60-degree threads. Tolerance allowances, root radii and manufacturing runouts are simplified; use the stated nominal dimensions for layout. Selected 100 mm rod length; the cited table supplies the corresponding coarse-pitch coupling interface. Root land radius is increased 0.01 mm to stabilize the long BREP union. Cut-end treatment is simplified. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  2.2 MBDetails & download
• stepM6Rotate in 3D
  M6 x 100 mm threaded rod

  M6 x 100 mm threaded rod, modeled from published dimensions. Overall 6 x 6 x 100 mm. Key dimensions: thread diameter 6 mm; pitch 1 mm; length 100 mm; root land radial adjustment 0 mm. Modeled right-hand nominal 60-degree threads. Tolerance allowances, root radii and manufacturing runouts are simplified; use the stated nominal dimensions for layout. Selected 100 mm rod length; the cited table supplies the corresponding coarse-pitch coupling interface. Root land radius is increased 0.01 mm to stabilize the long BREP union. Cut-end treatment is simplified. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  2.9 MBDetails & download
• stepM12Rotate in 3D
  M12 x 100 mm threaded rod

  M12 x 100 mm threaded rod, modeled from published dimensions. Overall 12 x 12 x 100 mm. Key dimensions: thread diameter 12 mm; pitch 1.8 mm; length 100 mm; root land radial adjustment 0 mm. Modeled right-hand nominal 60-degree threads. Tolerance allowances, root radii and manufacturing runouts are simplified; use the stated nominal dimensions for layout. Selected 100 mm rod length; the cited table supplies the corresponding coarse-pitch coupling interface. Root land radius is increased 0.01 mm to stabilize the long BREP union. Cut-end treatment is simplified. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

  1.6 MBDetails & download

Looking for 2D drawings, blocks and details? Browse the Drawing Library (1335).

Parts here are contributed by their authors or come from public-domain collections. If you believe a file infringes your rights, use Report on its viewer page or see our copyright policy.