Split-core CT clamp 13 mm with 3.5 mm jack lead
3D model · GLB · 750 KB
Need another format? Open it in the viewer and use Export.
Need a variation? Create one with AI.
Source: Innerscene - original model
Description
Split-core current transformer clamp with a 13 mm aperture, about 40 x 44 x 22 mm, lying on its back: black moulded fixed half (secondary coil inside) and hinged half swung open about 62 degrees on a steel pin hinge so both grey ferrite core halves show at the split, latch tab and catch ridge, and the lead leaving a boss and strain relief, laid on the floor and ending in a 3.5 mm stereo jack plug (tip, ring and sleeve contacts with insulating rings). Generic, no logos, silkscreen text or chip markings. Overall 96.3 x 112.2 x 22.0 mm. Overall 96 x 112 x 22 mm. Nominal size: 96.28 x 112.17 x 22.00 mm overall. glTF binary (GLB) mesh with materials, modeled in meters at real-world scale. Export to other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.
File: split-core-ct-clamp-13-mm-with-3-5-mm-jack-lead.glb · added 2026-11-18 · available until 2031-11-18. Added from Innerscene - original model under its CC0 dedication; see the library terms. Think this part infringes someone’s rights? Use Report on the viewer page or see our copyright policy.
More like this
Create a model with AI
Describe what you need, or add a photo, and AI builds it at real size in the viewer. Ask for changes in the chat, then export it. Free, with your own Anthropic or OpenAI key.
Open the AI Generator