Hall-effect current sensor module 30 A, 31 x 13 mmOpen in 3D

Hall-effect current sensor module 30 A, 31 x 13 mm

3D model · GLB · 478 KB

Need another format? Open it in the viewer and use Export.

Need a variation? Create one with AI.

Public domain (CC0). Free to use, modify and redistribute for any purpose, including commercially, with no credit required. About CC0

Source: Innerscene - original model

Description

Hall-effect current sensor module 31 x 13 mm: red PCB with the SOIC-8 Hall sensor IC in the current path, a blue 2-pin 5.08 mm screw terminal (rising clamps and captive screws) at one end, filter capacitors, resistor and power LED, and a 3-pin 2.54 mm header (VCC, OUT, GND) soldered underneath at the other end; standing on the header pins (30 A range version: the same board as the 5 A and 20 A versions). Generic, no logos, silkscreen text or chip markings. Overall 31.0 x 13.0 x 20.1 mm. Overall 31 x 13 x 20 mm. Nominal size: 31.00 x 13.00 x 20.10 mm overall. glTF binary (GLB) mesh with materials, modeled in meters at real-world scale. Export to other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

File: hall-effect-current-sensor-module-30-a-31-x-13-mm.glb · added 2026-11-18 · available until 2031-11-18. Added from Innerscene - original model under its CC0 dedication; see the library terms. Think this part infringes someone’s rights? Use Report on the viewer page or see our copyright policy.

More like this

Create a model with AI

Describe what you need, or add a photo, and AI builds it at real size in the viewer. Ask for changes in the chat, then export it. Free, with your own Anthropic or OpenAI key.

Open the AI Generator

Everything the AI Generator makes: 3D models, jewelry, people, floor plans, molecules and laser cut files