MIG welder on trolley with shielding gas cylinder

Description

MIG welder on trolley with shielding gas cylinder. Overall 853 x 526 x 1045 mm (X width x Y depth x Z height): MIG / MAG welder of the compact 250 A class with an internal wire feeder, on a two-wheel trolley with front swivel castors (one braked): light grey casing with graphite end frames and a carrying handle (casing top 885 mm above the floor), a front panel with current and voltage displays, wire-speed and voltage knobs, a mode key, the central torch connector and the earth socket, a side door with a window onto the 300 mm wire spool and the feed rolls, and a rear main switch and fan guard. A torch cable of about 3 m is coiled on a hook on the trolley frame with the MIG torch hanging from it, the earth lead runs to a clamp on a front hook and the mains cable and plug hang on the other side. A 10 l class argon / CO2 mixture cylinder (140 mm in diameter, 844 mm high without its valve; bright green shoulder) stands on the rear platform, chained to the frame, with a regulator, a content gauge and a flowmeter whose knob is the highest point; the push handle grip reaches 1016 mm above the floor. 250 mm rear wheels and 100 mm castors. The torch and earth leads in front of the control panel (-X) and the cylinder platform at the back set the width (853 mm in X), the torch cable and the mains plug the depth (526 mm in Y) and the flowmeter knob the height (1045 mm). Original unbranded model. Overall 853 x 526 x 1045 mm. Nominal size: 853.05 x 525.52 x 1045.00 mm overall. glTF binary (GLB) mesh with materials, modeled in meters at real-world scale. Export to other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.

File: mig-welder-on-trolley-with-shielding-gas-cylinder.glb · added 2026-10-23 · available until 2030-10-23. Added from Innerscene - original model under its CC0 dedication; see the library terms. Think this part infringes someone’s rights? Use Report on the viewer page or see our copyright policy.