Compression spring 16 mm OD x 40 mm
3D model · STL · 8.4 MB
Need another format? Open it in the viewer and use Export.
Source: Innerscene - original model
Description
Compression spring 16 mm OD x 40 mm, modeled from published dimensions. Overall 16 x 16 x 40 mm. Key dimensions: nominal outer diameter 16 mm; wire diameter 1.5 mm; free length 40 mm; turns 8; middle pitch 5.5 mm; end pitch 1.6 mm; ends Reduced pitch, planar ground. Original parameterized prototype. End pitch transitions continuously into the active coils; both ends are clipped to flat seating planes. Wire clearance is retained between turns. Geometric dimensions only. Material grade, spring rate, stresses, fatigue and load capacity are not assigned or validated. Watertight STL mesh in millimeters, ready to slice; printed performance is untested. Export to other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.
File: compression-16x40.stl · added 2026-10-05 · available until 2030-10-05. Added from Innerscene - original model under its CC0 dedication; see the library terms. Think this part infringes someone’s rights? Use Report on the viewer page or see our copyright policy.