ATM INS390LED 600 x 600 2x2 troffer
3D model · GLB · 5 KB
Need another format? Open it in the viewer and use Export.
Need a variation? Create one with AI.
Source: Innerscene - model from manufacturer data sheet dimensions
Description
ATM INS390LED 600 x 600: 3D model of this 2x2 troffer, built by Innerscene from the manufacturer's published dimensions for use in lighting design (CircadianLab and the IES library at innerscene.com). Overall about 595 x 595 x 70 mm as modelled (default length for linear runs). Source: ATM Lighting "INS390LED_White-data_sheet_2025-04-17". Frame width estimated; clip and surface versions drawn as the lay-in panel. Geometry is our own; no manufacturer CAD, mesh or image used. Origin at the photometric centre, Z up, light emitting downward (-Z); the luminous surface uses an emissive material named LUMINOUS. Adjustable heads keep their tilt and rotate nodes. Independent model by Innerscene; not made, supplied or endorsed by ATM Lighting. Product names and trademarks belong to their owners. Geometry is our own and approximate in detail; check the manufacturer's data sheet before specifying.
File: atm-ins390led-600-x-600-2x2-troffer.glb · added 2026-11-14 · available until 2031-11-14. Added from Innerscene - model from manufacturer data sheet dimensions under its CC0 dedication; see the library terms. Think this part infringes someone’s rights? Use Report on the viewer page or see our copyright policy.
More like this
Create a model with AI
Describe what you need, or add a photo, and AI builds it at real size in the viewer. Ask for changes in the chat, then export it. Free, with your own Anthropic or OpenAI key.
Open the AI Generator