240 x 30 mm continuous piano hinge
3D model · STEP · 522 KB
Need another format? Open it in the viewer and use Export.
Source: Innerscene - original model
Description
240 x 30 mm continuous piano hinge, modeled from published dimensions. Overall 30 x 240 x 3.5 mm. Key dimensions: length 240 mm; open width 30 mm; leaf thickness 1.2 mm; total depth 3.5 mm; hole 3 mm; hole row spacing 17 mm; first hole offset 10.5 mm; hole pitch 43.5 mm; holes 12; pose Flat open. LSD-30-240 envelope and mounting-hole pattern. Leaf folds are simplified to the stated section thickness; knuckle pitch, pin diameter and countersink detail are representative. Pin-crimp retention is omitted. Drawing table specifies 10.5 mm first-hole offset and 43.5 mm pitch. Six holes at these datums leave 12 mm at the opposite end of the 240 mm leaf; the end offsets are consequently asymmetric. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.
File: piano-hinge-240.step · added 2026-10-05 · available until 2031-10-05. Added from Innerscene - original model under its CC0 dedication; see the library terms. Think this part infringes someone’s rights? Use Report on the viewer page or see our copyright policy.