Revit RVT design review

Open a Revit RVT model in VR

A project team can receive a native Revit file and review its decoded building geometry in a headset. Open the RVT directly in the browser, inspect the result, and enter VR for a spatial conversation about the design.

Open the file on a compatible WebXR device, then press Enter VR.

Private local review, directly from the file

Open your file directly on the device running the headset browser. The browser parses it locally, so a confidential model stays on that device during local viewing. No conversion, no plugin, no upload, no account.

The optional Send to VR headset workflow on a computer uploads a local file after your confirmation to create a hosted share and pairing code. Choose direct local opening on the headset when your model needs to stay on that device. An already hosted model can also be opened from its URL.

Review the Revit project a colleague actually sent

A client or contractor often needs to understand a Revit design before the next coordination call. Native RVT opening makes that received project the starting point. A headset helps communicate a double-height space, the route past a column, or the position of a ceiling relative to the room below.

The reader reconstructs supported elements from the Revit database and groups the result into category layers. Inspect the rendered result before the meeting so that participants know which elements are available. Geometry recovery varies by element and file, and some elements use reconstructed or bounding geometry.

Select a review question and check the decoded categories

Begin with a specific question, such as the visual impact of framing above a reception area. Check the ordinary 3D view and its category layers, then choose the combination that explains that question. The supported reader handles Revit 2010 and later, with results depending on the saved project.

This workflow reads the RVT in the browser and enters VR from the same loaded model. That is useful when the recipient can access the project file but has no authoring installation. Confidential local review works on the device that opens the file, including a headset with a suitable browser.

How to open Revit RVT in VR

  1. 1

    Open the Revit RVT viewer in your headset browser

    Use a browser and device that support immersive WebXR. Make your file available through that device’s file picker, then open the viewer.

  2. 2

    Choose your file and inspect the loaded model

    Open the local file, check the geometry in the ordinary 3D view and confirm the source units and a familiar dimension. Choose the visible layers that explain your review.

  3. 3

    Press Enter VR

    Use the VR control after the model loads and accept the headset session prompt. A building, a room or a room-sized splat capture opens at true size, standing where the browser view was; a smaller object opens on a tabletop at arm’s length. Walk or Fly in the browser carries over into the headset.

Revit feet set the size you walk at in the headset

The Revit adapter keeps its scene coordinates in feet. The ordinary viewer uses those source units when displaying dimensions, including metric readouts. Check a known floor-to-floor height or door opening there before quoting a distance in a review.

A Revit building opens in VR at true size, using the internal feet, so a ceiling height or corridor width reads at its modelled size. Keep checked dimensions alongside the discussion whenever a decision depends on actual reach or clearance. The tabletop view in the headset menu fits the scene to 1.5 metres and lets the controller change its presentation size.

Move between levels and project areas

Teleport to a floor you can see, or walk with the left stick: stairs carry you between levels and walls stop you at the building envelope. To reach another storey quickly, switch to the tabletop from the menu and point at a floor on the small model; you land there at full size. A section cut from the menu removes the levels above you, and Fly mode gives an overview from above.

Move with your controllers

Push either stick forward and release
Aim the teleport arc at a floor and jump there.
Trigger
Teleport the same way. On the tabletop, point at a floor of the model and release to step in at true size.
Right stick left or right
Turn in 30 degree steps.
Hold a grip
Move faster while walking or flying. On the tabletop, grab the model and move it.
B or Y, or the wrist icon
Open the menu: Tabletop, Walk or Fly, stick walking, speed, section cut, lighting and exit.
Move your head
Look around and step within your headset boundary.

Teleporting and snap turns are the defaults because they are the most comfortable way to move. Stick walking and smooth turning can be switched on in the menu. The ordinary browser view is restored when you leave the headset session.

Revit RVT VR questions

â–¶Does this Revit VR workflow require a Revit plugin?

The viewer reads the received RVT directly in the browser. Local opening and VR viewing are free and account-free, with the same decoded model used for both the ordinary view and the headset session.

â–¶How should I check a native RVT before a client VR review?

Open the file in the ordinary viewer first. Check the spaces and category layers that matter for the review and compare familiar dimensions. This lets you frame the discussion around the geometry that the reader recovered from that project.

â–¶How can I keep a confidential model local during VR review?

Open your file directly on the device running the headset browser. The browser parses it locally, so a confidential model stays on that device during local viewing. No conversion, no plugin, no upload, no account. The optional Send to VR headset workflow on a computer uploads a local file after your confirmation to create a hosted share and pairing code. Choose direct local opening on the headset when your model needs to stay on that device. An already hosted model can also be opened from its URL.

â–¶How does model scale work in this VR viewer?

A model whose file states its units opens at true size: a building or a room puts you in Walk mode at 1:1. A small object opens on a tabletop with its largest dimension near 1.5 metres; the right stick resizes it, and pointing at one of its floors steps you in at true size. When a file stores no units, the menu marks the unit as a guess and lets you choose another.

â–¶What does the headset browser need?

It needs immersive WebXR support and access to the model file. Open the viewer in a compatible headset browser, select the file and use the VR control after loading. The ordinary 3D view is also available on desktop and mobile browsers.

Need a wellness lighting solution?
Contact our experts today!