Honeycomb storage panel
3D model · STL · 137 KB
Need another format? Open it in the viewer and use Export.
Source: Innerscene - original model
Description
Honeycomb storage panel, modeled from published dimensions. Overall 160 x 8 x 140 mm. Key dimensions: hex opening vertex diameter 24 mm; adapter vertex diameter 23.6 mm; mount holes 4.5 mm; adapter retaining screw clearance 3.2 mm; wall plane XZ; accessories face -Y. Original solid CAD modeled from scratch. Closed meshes and digital clearances are checked; physical printing and load/flow performance have not been tested. Use millimeter units for STL. Original 24 mm vertex-diameter hex grid, hook and cup. This is its own storage interface; compatibility with another honeycomb-wall product is not asserted. Adapters have 0.2 mm radial corner clearance and a through-hole for an M3 retaining screw/washer from the rear. Fasteners are not included. Print panel flat and accessories in appropriate supported orientations; no load rating is assigned. Watertight STL mesh in millimeters, ready to slice; printed performance is untested. Export to other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.
File: honeycomb-panel.stl · added 2026-10-05 · available until 2031-10-05. Added from Innerscene - original model under its CC0 dedication; see the library terms. Think this part infringes someone’s rights? Use Report on the viewer page or see our copyright policy.