Condenser mic with shock mount
3D model · GLB · 12.3 MB
Need another format? Open it in the viewer and use Export.
Source: Innerscene - original model
Description
Condenser mic with shock mount: generic large-diaphragm studio condenser microphone in an elastic suspension shock mount on a weighted desk stand, 150.0 x 187.0 x 357.0 mm overall (measured width x depth x height). Microphone 54.0 mm in diameter and 190.4 mm long (measured; the large-diaphragm class lists 54 x 189 mm) with a matte black body, satin nickel band, woven-mesh headbasket, gold front mark, pad and filter switches with printed legends and a three-pin connector underneath; shock mount 112 mm wide (measured) with two frame rings, cradle rings on elastic cords, a rear spine and an angle knob; 150 mm cast desk stand base (measured) with a chrome pole and a 5/8 in stand thread. Stands upright on its desk stand, front facing forward. Generic design with no logos or brand names. Overall 150 x 187 x 357 mm. Nominal size: 150.00 x 187.00 x 357.00 mm overall. glTF binary (GLB) mesh with materials, modeled in meters at real-world scale. Export to other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.
File: condenser-mic-with-shock-mount.glb · added 2026-10-25 · available until 2030-10-25. Added from Innerscene - original model under its CC0 dedication; see the library terms. Think this part infringes someone’s rights? Use Report on the viewer page or see our copyright policy.