Articulated crest dragon
3D model · STL · 2.8 MB
Need another format? Open it in the viewer and use Export.
Source: Innerscene - original model
Description
Articulated crest dragon, modeled from published dimensions. Overall 231 x 29 x 16.6 mm. Key dimensions: segments 8; joint pitch 26 mm; pin diameter 3.6 mm; hole diameter 4.3 mm; radial clearance 0.4 mm; vertical clearance 0.4 mm; retaining head diameter 5.6 mm; print in place true. Original solid CAD modeled from scratch. Closed meshes and digital clearances are checked; physical printing and load/flow performance have not been tested. Use millimeter units for STL. Eight independently closed segments form a dragon with an original horned head, dorsal crests, four feet and a tapering tail. Vertical captive-pin joints allow side-to-side articulation; each segment rests on the print bed. Print flat at the supplied scale with supports disabled around the joints. The 0.35 mm clearances and short bridges require printer-specific tuning; joint freedom and durability remain physically untested. Watertight STL mesh in millimeters, ready to slice; printed performance is untested. Export to other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.
File: articulated-crest-dragon.stl · added 2026-10-05 · available until 2031-10-05. Added from Innerscene - original model under its CC0 dedication; see the library terms. Think this part infringes someone’s rights? Use Report on the viewer page or see our copyright policy.