6 mm belt smooth idler, 5 mm bore
3D model · STEP · 20 KB
Need another format? Open it in the viewer and use Export.
Source: Innerscene - original model
Description
6 mm belt smooth idler, 5 mm bore, modeled from published dimensions. Overall 20 x 20 x 8.5 mm. Key dimensions: pitch 2 mm; belt width 6 mm; toothed face width 6.5 mm; bore 5 mm. Original pulley flange, hub and bore dimensions. Toothed variants use the published Misumi 2GT belt profile (R0.15/R1.00/R0.555, 0.75 mm height, 0.254 mm pitch-line differential) bent onto the pitch circle and used as a nominal groove envelope. The profile is spline-approximated after circular mapping. No vendor sprocket machining allowance or manufacturing tooth-form certification is implied. Set-screw holes are unthreaded pilots; idlers omit internal bearing races. Exact solid STEP geometry in millimeters, opens in any CAD system. Export to STL, OBJ, GLB and other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.
File: gt2-smooth-idler.step · added 2026-10-05 · available until 2031-10-05. Added from Innerscene - original model under its CC0 dedication; see the library terms. Think this part infringes someone’s rights? Use Report on the viewer page or see our copyright policy.