Three-angle phone and tablet stand
3D model · STL · 29 KB
Need another format? Open it in the viewer and use Export.
Source: Innerscene - original model
Description
Three-angle phone and tablet stand, modeled from published dimensions. Overall 150 x 110 x 124.2 mm. Key dimensions: backrest width 96 mm; backrest height 135 mm; stem width 72 mm; stem thickness 6 mm; slot width 74 mm; slot thickness 6.5 mm; cable slot 15 mm; shown angle deg 30. Original solid CAD modeled from scratch. Closed meshes and digital clearances are checked; physical printing and load/flow performance have not been tested. Use millimeter units for STL. Two-piece indexed stand: lift the backrest and put its stem into one of three angled slots. The preview shows the 30-degree slot. Slot width clearance is 2 mm; thickness clearance is 0.5 mm. Print base flat; print backrest on its rear face with support beneath the device ledge as needed. Separate the two solids in STEP/Blender for printing. No device weight or tip-stability rating has been measured. Watertight STL mesh in millimeters, ready to slice; printed performance is untested. Export to other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.
File: adjustable-device-stand.stl · added 2026-10-05 · available until 2031-10-05. Added from Innerscene - original model under its CC0 dedication; see the library terms. Think this part infringes someone’s rights? Use Report on the viewer page or see our copyright policy.