River bend segment
3D model · GLB · 10.2 MB
Need another format? Open it in the viewer and use Export.
Source: Innerscene - original model
Description
River bend segment: a 90-degree river bend on a 36 x 36 m footprint, 36.00 x 36.00 x 2.98 m overall (measured, X x Y x Z), with a 24 m centre-line radius about the south-west corner. The flow enters at the south port (x = +6 m) and leaves at the west port (y = +6 m); both carry the river-kit section (measured deviation at most 0.0 mm: bank tops Z = 0, water level -0.80 m, about 10.3 m of water). Mid-bend the channel turns asymmetric as in real meanders: a steep raw cut bank and a pool down to -2.40 m on the outside and a gentle gravel point bar on the inside. All other edge stretches are at Z = 0 (largest measured deviation under 1 mm); base to -2.90 m. Near each port the colour, detail and ripples match the straight segment, so the pieces chain in the flow direction. Original unbranded model. Overall 36 x 36 x 3 m. Nominal size: 36000.00 x 36000.00 x 2983.71 mm overall. glTF binary (GLB) mesh with materials, modeled in meters at real-world scale. Export to other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.
File: river-bend-segment.glb · added 2026-10-24 · available until 2030-10-24. Added from Innerscene - original model under its CC0 dedication; see the library terms. Think this part infringes someone’s rights? Use Report on the viewer page or see our copyright policy.