Harbor calibration boat
3D model · STL · 166 KB
Need another format? Open it in the viewer and use Export.
Source: Innerscene - original model
Description
Harbor calibration boat, modeled from published dimensions. Overall 72 x 34 x 50 mm. Key dimensions: length 72 mm; beam 34 mm; height 50 mm; chimney bore 5 mm; bow hole 3 mm; rear well depth 4 mm. Original solid CAD modeled from scratch. Closed meshes and digital clearances are checked; physical printing and load/flow performance have not been tested. Use millimeter units for STL. Own angular hull, four-pillar cabin, bridge roof, open chimney, rear well and transverse bow hole. This is a new calibration design, not a reproduction of the 3DBenchy mesh. Print flat on the keel without supports to expose overhang and bridging behavior. The cabin windows and roof are intentional bridge tests. Watertight STL mesh in millimeters, ready to slice; printed performance is untested. Export to other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.
File: calibration-harbor-boat.stl · added 2026-10-05 · available until 2031-10-05. Added from Innerscene - original model under its CC0 dedication; see the library terms. Think this part infringes someone’s rights? Use Report on the viewer page or see our copyright policy.