Cliff face
3D model · GLB · 5.8 MB
Need another format? Open it in the viewer and use Export.
Source: Innerscene - original model
Description
Cliff face: a limestone cliff on a 24 x 24 m footprint, 24.00 x 24.00 x 13.08 m overall (measured, X x Y x Z). The ground meets the south edge at Z = 0 and the grassy top meets the north edge at Z = +12.00 m (largest measured deviations under 1 mm); between them a bedded rock face rises about 9.4 m at a median 81 degrees (on the edge section) above a scree apron at about 34 degrees (natural talus stands near 33-37 degrees). Inside the piece the face has buttresses, vertical joints, bedding ledges and small overhangs. The east and west edges carry the same section (measured difference 0.0 mm), so cliff pieces chain along X; rock base to -1.00 m. Painted water-stain streaks, lichen and grass on the ledges. Original unbranded model. Overall 24 x 24 x 13.1 m. Nominal size: 24000.00 x 24000.00 x 13078.48 mm overall. glTF binary (GLB) mesh with materials, modeled in meters at real-world scale. Export to other formats from the viewer. Nominal dimensions for layout, fit checks and visualization; they do not establish a manufacturing tolerance class, load rating or standards certification. Original Innerscene model, released CC0.
File: cliff-face.glb · added 2026-10-24 · available until 2030-10-24. Added from Innerscene - original model under its CC0 dedication; see the library terms. Think this part infringes someone’s rights? Use Report on the viewer page or see our copyright policy.