Use this fixture in a lighting design
Open in CircadianLab to place this fixture in a room and calculate melanopic lux (EML), illuminance, UGR glare, and WELL v2 compliance — with radiosity simulation and real IES photometry. Free, no signup.
ISOLED LED Surface mounted light PROLAMP40D 70W black, 2500mm, opal, DALI DT8, CCT 1900K-6000K
93116134SET 90CRI
Polar Plot (2D)
Goniometer (3D)
Beam Analysis
Photometric Specifications
About this Photometric File
This page presents the IES photometric distribution for the LED Surface mounted light PROLAMP40D 70W black, 2500mm, opal, DALI DT8, CCT 1900K-6000K from ISOLED.
You can use this fixture in CircadianLab to design lighting layouts and calculate melanopic equivalent lux (EML), illuminance in lux or foot-candles, and UGR glare ratings — all in your browser, free, with no signup required.
Note on photometric plots: All plots on this page treat the luminaire as a point source emitting from its photometric center, which is the standard convention for IES LM-63 data.
Disclaimer: Innerscene does not manufacture, sell, or distribute the LED Surface mounted light PROLAMP40D 70W black, 2500mm, opal, DALI DT8, CCT 1900K-6000K or any other ISOLED products. This page is provided for informational and lighting-design purposes only, using publicly available photometric data. For product inquiries, pricing, or availability, please contact ISOLED directly.