Free Online PowerMill Viewer (No Signup)
Also opens DWG, DXF, STEP, IGES, IFC, SKP, STL, OBJ, GLB, FBX, 3DM and other 3D/CAD files. Drop any file on the viewer.
Works directly in Chrome, Firefox, Safari, and Edge
Also from Innerscene: Circadian Lab, a free lighting calculator for room illuminance, melanopic EML, and glare.
Create a model with AI
Describe what you need, or add a photo, and AI builds it at real size in the viewer. Ask for changes in the chat, then export it. Free, with your own Anthropic or OpenAI key.
Open the AI GeneratorWhat Is a PowerMill File?
Autodesk PowerMill, made by Delcam before Autodesk bought it, is CAM software for programming CNC milling machines, from 3-axis roughing to 5-axis finishing. You load a model, define the stock block and the tools, and PowerMill calculates toolpaths: the lines the tool centre follows, with the rapid moves, leads and links between the cuts.
PowerMill does not save one file but a project folder: an index file (.pmlprj) and one entity file (.pmlent) for each toolpath, tool, boundary, pattern, workplane and model, with the model’s surfaces in .pmlms files next to them (Delcam DGK surface data, the same kind PowerMill and PowerShape export as .dgk). To send or upload a project, you zip that whole folder.
PowerMill runs only on Windows and needs a licence. This viewer reads the zipped project in your browser and draws its toolpaths, coloured by tool, over the shaded model, with the boundaries, patterns and the stock block, with nothing to install.
Who Uses PowerMill Files?
CNC programmers and machinists in mould and die shops, aerospace, automotive, medical and general machining; the engineers and buyers who check a job before it goes on the machine; and students learning CAM. People mostly need a viewer when a project comes from a subcontractor or a colleague, to a computer without a PowerMill licence, or when they want a quick look at what an old project holds.
Common Use Cases
- See the toolpaths in a PowerMill project, over the part, without a PowerMill licence
- Check which tools a job uses and where each one cuts
- Review a project a subcontractor or colleague sent before it is machined
- Look at a project on a Mac, Chromebook, Linux computer or tablet
- Find out what an old or unlabelled PowerMill folder holds
- Open a .dgk model from PowerMill or PowerShape on its own
- Export the toolpaths and the model as DXF, OBJ or GLB, or save a picture of the view
Features
Opens PowerMill Projects
The project folder zipped, recognised by the files inside it whatever the ZIP is called, or a single toolpath, boundary or pattern file (.pmlent).
Every Toolpath
Cutting moves, leads, links and rapids drawn as lines, arcs included, each toolpath on its own layer you can switch on and off.
Coloured by Tool
Each tool has its own colour; leads and links take a lighter shade of it and rapid moves are red.
Tools Named
Each layer carries its toolpath’s tool, and the status line counts the toolpaths and tools in the project.
Boundaries and Patterns
Boundaries in pink and patterns in orange, in their real place.
Stock Block
The box or cylinder of stock the toolpaths were made for, as a grey outline.
Seen From the Active Workplane
Toolpaths go through their own workplanes and are shown from the project’s active one, the tool coming down from above.
Honest About Gaps
The model surfaces are not drawn yet, and an amber note says how to export the model as STL or IGES.
Export the Lines
Save the toolpath lines as DXF, OBJ or GLB, or the view as a picture.
Nothing Is Uploaded
The project is read and drawn entirely in your browser, with no PowerMill licence, no account and no upload.
Compatibility & Format Notes
What to upload: zip the whole project folder (in Windows, right-click the folder and choose Send to, then Compressed (zipped) folder) and drop the ZIP here, .pmlms files included, so the model comes with it. A single toolpath, boundary or pattern file (.pmlent) also opens on its own, and so does a model on its own: a project’s .pmlms file or a .dgk file exported from PowerMill or PowerShape. A tool, workplane or index file alone holds nothing to draw, and the viewer says so.
What is shown: every toolpath as lines, on its own layer named with its tool, which you can switch on and off. Cutting moves take the tool’s colour, leads and links a lighter shade of it, and rapid moves are red. Arcs are drawn as arcs. Boundaries are pink, patterns orange and the stock block a grey outline. Toolpaths are placed through their workplanes and shown from the project’s active workplane, the tool coming down from above. The model is drawn under the toolpaths as a grey shaded part on its own “Model” layer, from its Delcam DGK surfaces: planes, cylinders, tori and trimmed NURBS surfaces. A .dgk or .pmlms opened on its own is drawn in its saved face colours. The status line counts the toolpaths and tools.
Limits: some surface kinds are not read yet, and a surface whose trimming curves do not close is left out; the status line then counts the surfaces not drawn, and the part shows gaps there. If the project’s .pmlms file is missing from the ZIP, a note says the model is not drawn. Delcam triangle files (.dmt) are not read yet; export those as STL. The NC program PowerMill writes for your machine (G-code) also opens here, in the G-code viewer. Feed rates, cycle times and machine simulation are not shown.
Embed on Your Website
Add this viewer to your own site with a single line of HTML. Click Embed in the toolbar to generate an embed code, or use the snippet below with your own file URL.
Your Files Stay on Your Computer
Your PowerMill files are parsed entirely in your browser. Nothing is uploaded, stored, or shared unless you explicitly click the Share button. Shared files are hosted for 90 days then deleted.
Frequently Asked Questions
▶How do I open a PowerMill project without PowerMill?
Zip the project folder and drop the ZIP on this page. The viewer reads it in your browser and draws the toolpaths, boundaries, patterns and stock over the model, on Windows, a Mac, a Chromebook, Linux or a tablet, with nothing to install and no licence.
▶Which file do I upload: the .pmlprj or a .pmlent?
The whole folder, zipped. The .pmlprj file is only the project’s index, and each .pmlent holds one item, so on its own a toolpath .pmlent shows just that toolpath. Zipping the folder keeps everything together, and the viewer recognises the project by the files inside the ZIP, whatever the ZIP is called.
▶Why can’t I see the part, only the toolpaths?
The model’s surfaces live in the project’s .pmlms files, so the part is drawn only when those are in the ZIP: zip the whole project folder, not just the .pmlent files. If the status line says some model surfaces were not drawn, they are of kinds the viewer does not read yet; export the model from PowerMill as STL or IGES and open it in the STL viewer or IGES viewer to see every surface.
▶Can I open a .dgk file?
Yes. A .dgk file is a Delcam DGK surface model, exported from PowerMill or PowerShape, and it opens here on its own, as does a project’s .pmlms file. Its planes, cylinders, tori and trimmed NURBS surfaces are drawn in their saved colours. Delcam triangle files (.dmt) are not read yet; export those as STL.
▶What do the colours mean?
Each tool gets its own colour. Cutting moves are drawn in that colour, leads and links in a lighter shade of it, and rapid moves in red. Boundaries are pink, patterns orange and the stock block grey. Hover over the note in the status line for the list of toolpaths.
▶Can I open the G-code PowerMill made?
Yes. The NC program PowerMill writes through its post processor is G-code, and the G-code viewer draws its moves in the browser too. That shows what the machine will run, while the project shows the toolpaths as PowerMill calculated them.
▶Can I edit toolpaths or simulate the cut here?
No. The viewer shows the project as it was saved and does not change it, recalculate toolpaths, remove stock or check for collisions. Do that in PowerMill.
▶Is this PowerMill viewer really free?
Yes, completely free. No signup, no watermarks, no file size limits on the viewer (the optional share-link feature has a 100 MB upload cap). Built by Innerscene as a tool for architects, engineers, and designers.
▶Are my files uploaded to a server?
No. All parsing, rendering, and conversion runs in your browser: nothing is uploaded, stored, or transmitted by default. The Share button is the only feature that uploads a file, and only when you explicitly click it.
▶Can I convert to another format?
Yes. Click Export in the toolbar to save the toolpath lines and the model as DXF, OBJ or GLB, or the current view as a picture, or use the PowerMill to DXF converter. The viewer does not write PowerMill projects or NC programs.
▶Can I embed this viewer on my own site?
Yes. Click Embed in the toolbar to generate a one-line <iframe> snippet you can paste into any HTML page. You can choose whether the embed shows the viewer’s toolbar.
Autodesk and PowerMill are registered trademarks or trademarks of Autodesk, Inc. Innerscene is not affiliated with Autodesk.
