Free Online SPIP Height Image Viewer (No Signup)

A .bcr or .bcrf file is a height image in the plain raster format of Image Metrology’s SPIP: one height per pixel on a regular grid, from an atomic force or scanning tunnelling microscope, an optical profilometer or another surface scanner. View and export SPIP height images (.bcr, .bcrf) in your browser.

Also opens DWG, DXF, STEP, IGES, IFC, SKP, STL, OBJ, GLB, FBX, 3DM and other 3D/CAD files. Drop any file on the viewer.

Works directly in Chrome, Firefox, Safari, and Edge

Also from Innerscene: Circadian Lab, a free lighting calculator for room illuminance, melanopic EML, and glare.

Private by default. Files are parsed locally in your browser. Uploading is only required if you choose to share a link.

Create a model with AI

Describe what you need, or add a photo, and AI builds it at real size in the viewer. Ask for changes in the chat, then export it. Free, with your own Anthropic or OpenAI key.

Open the AI Generator

What Is a SPIP Height Image File?

SPIP (Scanning Probe Image Processor) is Image Metrology’s program for analysing images from scanning probe microscopes and surface profilers. Its BCR format is simple enough that many instruments and programs, Gwyddion among them, read and write it to pass height data along.

A file starts with a short text header (“fileformat = bcrstm” and lines such as xpixels, ylength and zunit) and then holds one value per pixel, row after row. There are four variants: bcrstm with 16-bit whole numbers scaled by a step size (bit2nm), bcrf with 32-bit floating-point heights, and a _unicode version of each whose header is UTF-16 text. The header also gives the scan’s size and the units of x, y and height (nanometres unless it says otherwise).

This viewer reads all four in your browser and draws the image as a 3D surface at its true width and depth, coloured by height, so you can turn a scan around without installing SPIP or Gwyddion.

Who Uses SPIP Height Image Files?

Researchers and students working with AFM and STM images, metrology and quality labs measuring surface finish with optical or stylus profilometers, materials scientists and semiconductor engineers, and anyone who has been sent a .bcr or .bcrf file and has no SPIP licence.

Common Use Cases

  • Look at an AFM, STM or profilometer scan without installing SPIP
  • Turn a height image around in 3D to see pits, steps, grains and tool marks
  • Check a scan’s size, pixel count and height range before analysing it
  • Open a .bcr or .bcrf file on a Mac, Chromebook, Linux computer or phone
  • Export the surface as GLB, PLY, OBJ, STL or another 3D format

Features

Opens .bcr and .bcrf Files

All four SPIP variants: 16-bit bcrstm and float bcrf, each with a plain text or UTF-16 header, recognised by the header inside the file.

Coloured Height Surface

The height grid as a 3D surface, blue for the lowest heights through green and yellow to red for the highest.

True Width and Depth

Drawn at the x and y spacing the header gives, in millimetres, or in micrometres or nanometres for AFM-sized scans.

Height Factor Named

Nearly flat surfaces are raised by a round factor such as 10 or 50, written on the surface, so the exaggeration is never hidden.

Void Pixels Left Open

Pixels marked void, and a constant fill far outside the real heights, are left as holes instead of cliffs.

Spikes Do Not Flatten Colours

The colour ramp spans the bulk of the heights, so a few outliers do not turn the rest of the scan one colour.

Large Scans Open

Only the rows needed are read, and images bigger than about 1.2 million pixels are thinned evenly, so large profiles open without reading every pixel.

Export the Surface

Save the coloured surface as GLB, PLY, OBJ, STL or another 3D format, or the view as PNG.

Works on Any Device

Windows, Mac, Chromebook, Linux, phone or tablet: no SPIP or Gwyddion install needed.

Nothing Is Uploaded

The scan is read and drawn entirely in your browser. No account, no upload, no copy of your file on a server.

Compatibility & Format Notes

What is shown: the height grid as a surface at the file’s own x and y spacing, coloured blue (low) through green and yellow to red (high). The colours span the bulk of the heights (from the 0.5th to the 99.5th percentile), so a few spikes do not wash out the rest. Void pixels (32767 in 16-bit data, values above 1.7e38 in float data) are left open, as is a constant fill value far outside the other heights, such as the zeros some profilometers write where a rotated scan has no reading.

Units and height scale: lengths are drawn in millimetres (metres for a scan of a metre or more); a scan smaller than 0.1 mm, such as an AFM image, is drawn in micrometres or nanometres. Heights keep their true scale when the relief is at least a tenth of the scan’s longer side. A flatter surface (a few micrometres over a few millimetres, say) is raised by a round factor such as 10 or 50 until its relief is about a fifth of the longer side; the factor is named on the surface (“heights x 50”) and the true heights stay in the file details. Heights in a unit that is not a length (volts, for example) are scaled to the same fifth.

Limits: the surface is drawn as stored, with no plane levelling, filtering, roughness parameters or profiles; use SPIP or Gwyddion for analysis. Very large images are thinned to about 1.2 million points by keeping every second, third or nth pixel, so the finest detail of a 10,000-pixel-wide scan is not drawn. A file marked as a force curve has no surface and is not drawn. The reader was built from the published layout and a small number of files, so some writers’ variants may not open yet.

Embed on Your Website

Add this viewer to your own site with a single line of HTML. Click Embed in the toolbar to generate an embed code, or use the snippet below with your own file URL.

<iframe src="https://www.innerscene.com/tools/bcr-viewer?embedded=1&url=YOUR_BCR_URL" width="800" height="600" frameborder="0" allowfullscreen></iframe>

Your Files Stay on Your Computer

Your SPIP Height Image files are parsed entirely in your browser. Nothing is uploaded, stored, or shared unless you explicitly click the Share button. Shared files are hosted for 90 days then deleted.

Frequently Asked Questions

▶How do I open a .bcr or .bcrf file without SPIP?

Drop it on this page. The viewer reads the height image in your browser and draws it as a coloured 3D surface, on Windows, a Mac, a Chromebook, Linux or a phone, with nothing to install.

▶Why does my surface say “heights x 50”?

Most scans are far wider than they are tall: a few micrometres of relief over a few millimetres would look like a flat sheet. The viewer raises such a surface by a round factor (1, 2 or 5 times a power of ten) and names it, so you always know the picture is exaggerated. The heights in the file are not changed, and the true minimum and maximum are listed in the file details.

▶What is the difference between .bcr and .bcrf?

A .bcr file (fileformat bcrstm) stores each height as a 16-bit whole number, multiplied by the bit2nm step in the header to get the height. A .bcrf file stores 32-bit floating-point heights directly. Either can have a plain text or a UTF-16 header; the viewer reads all four.

▶Why are there holes in my scan?

Those pixels have no reading: they are marked void in the file, or they hold a fill value (often zero) far outside the real heights, as profilometers write where the light did not come back or where a rotated scan leaves an empty corner. The viewer leaves them open rather than drawing them as a cliff.

▶Does the viewer measure roughness or level the surface?

No. It shows the heights as stored, without levelling, filtering or roughness parameters such as Ra or Sa. Use SPIP or Gwyddion for measurements; the viewer is for looking at a scan and sharing it.

▶Is this SPIP Height Image viewer really free?

Yes, completely free. No signup, no watermarks, no file size limits on the viewer (the optional share-link feature has a 100 MB upload cap). Built by Innerscene as a tool for architects, engineers, and designers.

▶Are my files uploaded to a server?

No. All parsing, rendering, and conversion runs in your browser: nothing is uploaded, stored, or transmitted by default. The Share button is the only feature that uploads a file, and only when you explicitly click it.

▶Can I convert to another format?

Yes, the surface. Click Export in the toolbar to save it as GLB, PLY, OBJ, STL, FBX or another 3D format (GLB and PLY keep the colours), or the view as PNG. The exported mesh keeps the height factor shown on screen. The viewer does not write .bcr or .bcrf files.

▶Can I embed this viewer on my own site?

Yes. Click Embed in the toolbar to generate a one-line <iframe> snippet you can paste into any HTML page. You can choose whether the embed shows the viewer’s toolbar.

SPIP is software by Image Metrology A/S. Innerscene is not affiliated with Image Metrology.

Need a wellness lighting solution?
Contact our experts today!